Characteristics
Motor Rating | H.P. | 3.0 to 30.0 |
KW | 2.2 to 22 | |
Stage | NO | 2 to 12 |
Head Range | METER | 15 to 160 |
Discharge | LPM | 500 to 2200 |
Outlet | MM | 75mm to 100mm |
INCH | 3" to 4" | |
RPM | - | 2850 |
Frequency | HZ | 50 |
Application | Irrigation,Farm, Agriculture, Industrial, Gardens, Fountains Fire Fighting System |
Material of Construction - Motor
- Oil Seal: Nitrile butyl rubber
- Motor Shaft: SS - 420
- Motor Body Pipe: SS-304
- Motor Bush: LTB-4
- Thrust bearing assembly: SS - 420 & Carbon
- Diaphragm: High Nitrile Butyl Rubber
- Motor Base: Cast Iron
- Housing Set: Cast Iron
Material of Construction - Pump
- Check Valve Housing: Cast iron
- Impeller: SS-304 / SS-410
- Bowl: Cast Iron
- Counter Bush: SS-410 / SS - 304
- Pump Bush: NBR/ LTB 4
- Pump Sleeve: SS-410
- Suction: Cast iron
- Pump Shaft: SS-410
- Coupling / Pump Couple: SS-410
Salient Features
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series.
- 20 Mtr. Head per stage in radial flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Motor portion covered with corrosive resistance Stainless steel SS-304.
- More durability and hygiene.
- High operating efficiency.
- Special designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures services feasibility.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
- Fully SS Pumps are available.
Our Products
- V3 Water Filled Submersible Pump Sets
- V4 Oil Filled Submersible Pump Sets
- V4 Water Filled Submersible Pump Sets
- V5 Submersible Pump Sets (Radial & Mixed Flow)
- V6 Submersible Pump Sets (Radial & Mixed Flow)
- V6/V7 & V6/V8 Combination Model (Janata Model)
- V8 Submersible Pump Sets (Radial & Mixed Flow)
- Openwell Submersible
- MPVTRF (Vertical Openwell)
- Centrifugal Monoblock Pump
- Induction Motor